I appreciate your assistance. I looked in the Intel website and found a driver PROwin64 which said it was for windows 7 x64.
| OS Name | Microsoft Windows 7 Professional | |||
| Version | 6.1.7600 Build 7600 | |||
| Other OS Description | Not Available | |||
| OS Manufacturer | Microsoft Corporation | |||
| System Name | METUS | |||
| System Manufacturer | Hewlett-Packard | |||
| System Model | HP Z820 Workstation | |||
| System Type | x64-based PC | |||
| Processor | Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz, 2001 Mhz, 8 Core(s), 16 Logical Processor(s) | |||
| BIOS Version/Date | Hewlett-Packard J63 v02.08, 17/10/2012 | |||
| SMBIOS Version | 2.7 | |||
| Windows Directory | C:\Windows | |||
| System Directory | C:\Windows\system32 | |||
| Boot Device | \Device\HarddiskVolume4 | |||
| Locale | MÈxico | |||
| Hardware Abstraction Layer | Version = "6.1.7600.16385" | |||
| User Name | METUS\Administrator | |||
| Time Zone | Central Daylight Time (Mexico) | |||
| Installed Physical Memory (RAM) | 8.00 GB | |||
| Total Physical Memory | 7.92 GB | |||
| Available Physical Memory | 5.67 GB | |||
| Total Virtual Memory | 15.8 GB | |||
| Available Virtual Memory | 12.9 GB | |||
| Page File Space | 7.92 GB | |||
| Page File | C:\pagefile.sys |
Here is all the information I gathered by running diagnostic tests.
Info Driver
12.10.29.0 built by: WinDDK
Driver Date: 02/05/2014
Location: PCI bus 0, device 25, function 0
Intel PROSet Version 20.0.10.0
Speed: 1.00 Gbps/Full Duplex
Diagnostics
Run Test
Connection Status : Failed
This test relies on a response from a
gateway, DNS, DHCP, or WINS server and
no such response was received. Any such
server for this connection may be unavailable
or misconfigured.
This adapter is configured
to obtain an IP address automatically
but no DHCP server is present on the network.
Windows selected an IP address using Alternate
Private IP Addressing.
Cable Link Status : Passed
This adapter is running at full speed.
Run Test: Cable
| Cable Length Status : | Passed |
| Cable Length: | 6 meters |
| Cable polarity Status : | Passed |
Cable polarity normal.
| Local Receiver Status : | Passed |
| Remote Receiver Status : | Passed |
| Cable Quality Status : | Passed |
Cable quality is excellent.
| Cable Integrity Status : | Passed |
No cable problems detected.
Run Test: Hardware
| Register Status | : Passed |
| EEPROM Status | : Passed |
| FIFO Status | : Passed |
| Interrupt Status | : Passed |
| Loopback Test(s) | : Passed |