Re: 82599EB 10Gb SFP+ NIC Problem
Thanks Sandy, They way I now understand this is that I have two choices: 1. Replace my Cisco SFP-10G-LRM modules with SFP-10G-LR modules on the switch and install an Intel E10GSFPLR module in the...
View ArticleRe: Intel E10GSFPLR and Cisco SFP-10G-LRM Compatibility
Andrew, Were you ever able to confirm if the Intel LR module will work with the Cisco LRM module on the other end? I'm in the same boat and the Cisco LR modules are over $1200.
View ArticleRe: XL710-Q2 doesn't support QSPF+ configuration modification
Hi Sandy, Thank you for answering.I understood to use ./qcu64e /nic=1 /set=4x10 command for setting breakout mode. However my question is that, I couldn't set it to 4x10 mode due to the error message...
View ArticleRe: XL710-Q2 doesn't support QSPF+ configuration modification
Hi Iris, Thanks for writing back. Please provide us the serial number of your network adapter. We would like to verify if your network adapter is an Intel Retail Adapter or manufactured for other...
View ArticleRe: Intel Ethernet Connection I218-LM - Wake Up issues
Hi wroot, Glad to help. Sincerely, Sandy
View ArticleRe: Access to low level PHY registers of ethernet card
Thanks a lot for your reply.Now I'm trying to figure out if this RxError counter applies for CRC Error Count or Alignment Error Count or Symbol Error Count, Etc...In the MIB file the description of...
View ArticleRe: Intel 82579V Issue
I just wanted to share my solution to this issue: Changing power options for the device did not resolve the issue (disabled "allow windows to turn off to save power" and "energy efficient Ethernet",...
View ArticleRe: XL710-Q2 doesn't support QSPF+ configuration modification
Hi Sandy, Please see the attached. Thanks,Iris
View ArticleRe: FreeBSD and Intel XL710 10G
Hi John_obn, We will submit the driver to Freebsd and they will post on the Freebsd.org website. With regards to the fix in 1.4.8 official driver, you may refer to the readme...
View ArticleRe: Intel 82579V with Windows 10
Do you happen to have a status as to when this issue may be fixed? The update above doesn't provide much insight.
View ArticleRe: Is there a Windows 10 driver for Intel(R) 82578DC? I have no internet...
I have moved your post to the appropriate support team: Wired Ethernet Allan.
View ArticleIntel X710 DA2 NVM - Update not available
When starting on both FreeBSD and Linux the latest driver complains that the NVM should be updated. As there's no FreeBSD NVM update utility available I got the machine temporarily booted into Linux...
View ArticleRe: Intel X710 DA2 NVM - Update not available
Hi smh1, Thank you for contacting Intel. We would like to request for your adapter's details to check if you have the latest firmware version. Run ethtool -i and post the results here. Sincerely, Sandy
View ArticleRe: Strip vlan tag on receiving packets (in hardware)
Hi, I have a issue with SR-IOV vlan, I want to know how to stripe vlan on guest layer, the vlan has pass to host layer as below ip link show ens1f0: ...vf 60 MAC fa:16:3e:3e:09:39, vlan 202, spoof...
View ArticleRe: Intel X710 DA2 NVM - Update not available
ethtool -i enp2s0f0driver: i40eversion: 1.3.47firmware-version: 4.41 0x80001867 16.5.10expansion-rom-version: bus-info: 0000:02:00.0supports-statistics: yessupports-test: yessupports-eeprom-access:...
View ArticleRe: Intel X710 DA2 NVM - Update not available
Thanks to Intel support guys, we're identified the issue, the supplier shipped Dell SKU versions of the card which is not supported by the generic update tool. We'll be returning the cards to the...
View ArticleIntel 82567V-2 Windows 10 WOL
Hi all, I wanted to get some info regarding an Intel 82567V-2 onboard NIC and WOL in Win 10. Currently the NIC is using the MS driver in Win 10 as there is no official Intel driver available. I want to...
View Article[802.1X Wired] I217-LM conflict between 802.1X and Wake On Lan
Hello, We encounter an issue with the WOL fonctionnality and 802.1X using computer based authentication.(Intel Ethernet Connection I218-LM - Wake Up issues) Message #4 When Computer is waking up from...
View ArticleRe: [802.1X Wired] I217-LM conflict between 802.1X and Wake On Lan
The WOL can be done by Intel ME interface of chipset, not OS driver, so you probably need to setup a right hostname in ME BIOS (Ctrl+P at time of Intel Management Engine screen during POST), default...
View Article