Re: Intel 82575EB lock at 10Mbps ?
I would check the switch configuration. You can do a direct connection from port to port and see what they link at to confirm the functionality of the devices.
View ArticleRe: The problem of VLAN and Ping when using the SR-IOV function of 82599
Patrick,Thank you for the reply. Yes,i have the latest drivers.When dcb is off,then the PF can "ping" other hosts in the sr-iov virtualization environment,but when dcb is switched on,those error...
View ArticleRe: OS2BMC configuration
I ended up using the Intel SVTools to inspect the MAC management registers. The crucial bit for my issue was the OS2BMC Enable (MAC Management Control (MANC) register bit 28), which for some unknown...
View ArticleClik here to view.
Intel 82574L Gigabit Network Adapter Connection error in DN2800MT motherboard
Hello, Recently I bought an Intel DN2800MT motherboard and installed Windows7 Professional OS (32 bit). I have tried installing the ethernet drivers that is available in the Intel download center and...
View ArticleRe: Best way to handle mismatched ixgbe & ixgbevf drivers for SR-IOV
Thanx for posting to our site. You must keep your PF and VF drivers aligned, which you have. For the benefit of others, at this time the current driver versions are: PF – ixgbe driver –...
View ArticleRe: Best way to handle mismatched ixgbe & ixgbevf drivers for SR-IOV
Hi Patrick, Are there any Intel 10Gbps SFP+ adapters existing that do not have the MTU limitation as Intel X540 provides? We cannot test Intel X540 (RJ45 only?) unless we can get a compliant switch...
View ArticleRe: Best way to handle mismatched ixgbe & ixgbevf drivers for SR-IOV
I am afraid that is the only one available at this time. You can set the MTU of the PF to be larger. Many deployment won't use the PF for traffic anyhow, and only use VF's. You can set the MTU in...
View ArticleNIC power management disable in Solaris
Dear All, Recently I met a continuous link up/down problem in my T4 workstation.According to the cisco troubleshooting manual, the NIC Power Management should be disabled.Please anyone help me to...
View ArticleHW Time Stamping on Intel 82574L Gigabit Ethernet Controller
Hi ,I am trying to perform HW time stamping of packets which I receive on an Intel 82574L Gigabit Ethernet Controller. I haveOS: LinuxDriver: e1000eI want to know if it is possible to HW time stamp...
View ArticleRe: Intel 82574L Gigabit Network Adapter Connection error in DN2800MT...
If anyone (INTEL community) knows how to resolve this, please let me know asap, Thanks in advance,Akhil
View ArticleClik here to view.
Re: Intel I350 NIC Teaming Issue
Hello Gerard I have been asking for basically the same question re IEEE802.3ad dyn agg lacp issue month ago. No luck.Intel Server NIC I350 LACP IEEE802.3ad teaming issue Moreover more than hundred...
View ArticleIntel 82579LM LAN Card Connection Failure to Google Fiber/TV Network Box
About a month ago I moved to the new Google Fiber/TV service in Kansas City. While everything else, including wireless networking, is functional, I cannot get the Intel 82579LM LAN card in my HP...
View ArticleUnable to get a second 82599 NICs to work on CentOS
I have a Dell R620 server running CentOS 6.3, the server came with a 82599 card, recently I bought a second 82599 card and installed it but NICs' status are down. I confirm the card is detected, from...
View ArticleLow speed on 82574L at 100M Full duplex, hanging on 82579LM
Hello all, I've found a strange behavior of NICs on our server. Some intro: Server board: supermicro x9scl-f, OS: Windows Server 2012NIC1=82574l - for LAN connectionsNIC2=82579lm - for WAN connection...
View ArticleRe: Intel 82579V Issue
So is there an update for this issue? As far as I know I have the newest 82579V drivers and ME firmware is up to date. However on my Asus Maximus IV Z-Gene/3Gen Mobo the ethernet port (82579V NIC)...
View ArticleRe: Intel I217-V (WinPE drivers)
Thanks for help, it works with WinPE 4. I was trying to make it work with WinPE 3, but without success. Finally I've moved to version 4. Robert
View ArticleRe: Issue with "Detected Tx Unit Hang" dropping network connections
Updating to the latest driver did not help for us. The issue was seen again around 4 days later. CentOS release 6.4 (Final) Kernel Version: 3.11.7-1.el6xen.x86_64 # ethtool -i eth0driver: ixgbeversion:...
View ArticleRe: Issue with "Detected Tx Unit Hang" dropping network connections
We've been running the latest version, 3.18.7-1 almost since the day it came out and still see the issue. We are seeing it less frequently, but its still happening. I've stopped hearing back from Intel...
View ArticleRe: Issue with "Detected Tx Unit Hang" dropping network connections
Hi, We finally solved the issue by disabling LRO. Make your own tests and see the results. We have been running for more than 15 days without issues, while without this configuration NIC started to get...
View ArticleRe: I217-V No connection with 100 full duplex setting
I was able to partially fix this problem. I found out that NIC has problem only while it's connected to my ASUS RT-G32 router. I inserted between PC and router extra switch (also from ASUS) and link...
View Article