Re: ixgbe driver does not support MAC address change
Hi tobyfan, Please re-test with the latest version of ixgbe driver 4.1.1.1. The driver is available for download at...
View ArticleClik here to view.
Re: Hi, can any one help me in find old stm-1 tranciever which was part of...
Hi Shahrozabbasi, It would be best you can contact Infineon support directly, you can visit the wesbsite and submit your inquiries. Product Support - Infineon Technologies rgdswb
View ArticleRe: Bad impressions of the network card after driver update.
Yes. Now you understood me correctly. I think the browser is not important. Because Windows 10 (Edge) with a new driver, too, have this problem. The delay may be from 1 to 3 seconds.
View ArticleRe: Intel ® Ethernet Converged Network Adapter X520-DA2
Hi Paolo, Thank you for contacting Intel. With regards to your inquiry on compatibility, it would be best if you can check with Nexenta* regarding the issue. Hope you are able to fix the issue at...
View ArticleRe: SR-IOV with ixgbe - Disabling Rx VLAN filter
Hi Meganathan, Thank you for contacting Intel. I will need to check on this. Sincerely, Sandy
View ArticleRe: I211/I217-V Windows 10 LACP teaming fails
This morning, cumulative update to Win 10 : 10586.164 Still no teaming possible (I understand this will requiere also a modification from Intel drivers side, but nothing in the release notes that says...
View ArticleRe: I211/I217-V Windows 10 LACP teaming fails
I have been waiting EIGHT MONTHS for this foolish fiasco to be resolved too, with several driver updates and Windows 10 builds not addressing it. What is the hold up? I used to have a 4x1Gbps trunk to...
View ArticleRe: VLAN creation on Windows 10 Enterprise TP
Yes we are in the same situation and it is surprising how long this has been going on.
View ArticleRe: Bad impressions of the network card after driver update.
Hi John, Thank you for the clarification. Will further check on this. rgds,wb
View ArticleClik here to view.
Re: patches to disable anti-spoofing in VF (igb & ixgbe)
Hi tonychung, Thank you for contacting Intel. We'll further check on this. I apologize for the delay. Sincerely, Sandy
View ArticleRe: VLAN creation on Windows 10 Enterprise TP
Normally I've trunked in 10 vlans on my workstation. What does intel suggest I do when I'm going to upgrade to windows 10? Have 4 quadport nics installed?! And I want 10Gbps, especially on some of the...
View ArticleRe: Constant cpu usage (20%) by Intel PROSet Monitoring Service
I have moved your post at: Wired Ethernet Allan.
View ArticleRe: ixgbe driver does not support MAC address change
I have download the driver 4.1.1.1. The code is a little different, but the logic is the same. When Guest OS change the MAC of a NIC, a message is sent from VF, and the message handler calls function...
View ArticleRe: ixgbe driver does not support MAC address change
Hi Tobyfan, Thanks for the update. Please provide also where did you download the origin code of the driver you refer to in the initial post? For your test result. we will further check. rgds,wb
View ArticleRe: Queue issue about XL710
HI fishingbear2, Can you also provide me the steps how you reproduce the issue. e.g the connection, the switch and how you send and data, need more detail to check on this. thanks,wb
View ArticleClik here to view.
Re: Constant cpu usage (20%) by Intel PROSet Monitoring Service
Hi Arnoldo, Thank you for the post. Let me further check for you as I understand Intel PROSet Monitoring Service is used to monitor the network adapter's status. Thanks,wb
View ArticleRe: ixgbe driver does not support MAC address change
I download the driver from source forge. Intel Ethernet Drivers and Utilities - Browse /ixgbe stable at SourceForge.net thanks
View Article82599 hardware filter to only accept UDP4 traffic sent to 53 port
Hello, I tested hardware filters on my Ubuntu+82599 development environment and everything seemed to work great. I've further read Intel and ethtool documentation, but I've been unable to find a...
View Articlepoll the register for Tx/Rx interrupt
Hi! My servers use 82599ES 10-Gigabit adaptor. I want to poll the register for the Tx/Rx interrupt events (MSI-x mode). From the 82599 datasheet, i know the registers are EICR(1) and EICR(2) ....
View ArticleRe: poll the register for Tx/Rx interrupt
After reading the datasheet and the driver code (ixgbe), i cannot get the information of EICR(1) and EICR(2).
View Article