i210/i211 MAC Address configuration
Hi,we have developped a board based on iMX6 + i211/i210 Ethernet MAC/Phy and Linux 3.0.35I have compiled the igb 5.0.6 and igbvf 2.3.2 to have the drives for my kernel version.The driver is loading...
View ArticleRe: Can't setup VLANs on Gigabit CT Desktop Adapter
Hi vteh9, I tried to do what you've suggested: unfortunatelly it didn't help. Thanks anyway.
View ArticleIntel® 82583V Hyper-V Server 2012 driver
netMy hyper-v system fails on occassion with the following error - Intel(R) 82583V Gigabit Network Connection The network driver has been stopped because the network adapter has been removed. I am...
View ArticleDetermine SFP module serial number from ixgbe driver?
Hi all, I've got some Intel 82599-based 10 Gbps NICs (using the ixgbe driver). I've plugged some direct-attach cables into these cards. Those cables have SFP+ ends, with a cable part number and...
View ArticleCX4 network adapter
Hi, I'd like to ask if there is any new 10G Intel server adapter with a CX4 interface?I'm not interested in the NetEffect card. There was 82598EB but it's EOL. I've found that CX4 is supported on...
View ArticleVF bus-info is null with xen4.4
Hi guys!I installed Ubuntu 12.04 LTS(Kernel version: 3.8.1) and Xen 4.4 to make VM using VF.I use 2 82599 10G nic.So I made some VFs and set "iommu=1" in GRUB like these.root@NewXebra2:/guest# lspci |...
View ArticleSystem does not detec the new PCI-ex network adapter
I purchased a new NIC which is Intel Gigabit CT PCI-E Network Adapter EXPI9301CTBLK. I plugged in PCI-Ex slot, and then I booted the system. But it does not detect the new network adapter. The device...
View ArticleRe: Intel(R) 82579V Gigabit Network device issues
Hey Simon, Have you got any tricks up your sleeve to modify the inf file to install server 2012? I have looked at a few and have put several hours of work into this - it's rather ridiculous. Gigabyte...
View ArticleClik here to view.
Intel 82579V Gigabit Network Connection Issue
Hello Intel Forum. I am posting here only because I ran out of things to do. It is literally the only one problem I have with my computer and it really annoys me. So, everytime I start my computer, I...
View ArticleRe: SR-IOV VF performance and default bandwidth rate limiting
Patrik, Me and my colleagues run in to the same performance problem with the PF functions when SR-IOV was enabled, but it seems like an upgrade of the ixgbe and ixgbevf driver seem to have solved the...
View ArticleTrouble Teaming X540-T2 with Server 2012R2
I have a new 2012R2 server with an Intel LOM X540-T2 Dual port, 10-gig copper NIC. I'm trying to team both ports to a Netgear 10-gig copper switch (XS712T, CAT6A cables) and not having much luck....
View Article[I210 Open-AVB] How to enable the queue 0 and queue 1
Hi, I'm doingsomeresearch word about the AVB on linux. I want to use the I210 as the network adapter,I already read the linux code of Open-AVB, queue 0-1 are mapped to a user-space application, queue...
View ArticleSome VFs are assigned three IRQs and some receive only two
Greetings all, We are using Ubunti-Precise 3.2.0-29-generic #46, with KVM version qemu-kvm-1.0 and libvirt 0.9.8. We are using Intel NIC 82599 with ixgbe driver 3.11.33 and in-tree ixgbevf driver...
View ArticleUpgrading from XP to W8.1 for PRO Network Connections 8256V-2 10/100?
I am thinking of Upgrading my old Dell Vostro 200 from XP to W8.1 using a clean install on a new SSD. The only significant issue that the Microsoft Windows Upgrade Assistant shows up is that for my...
View ArticleClik here to view.
Windows 2012 R2 VM crashes with Intel Pro1000 PT Dual
Hello to the whole community I installed an IBM Thinkserver with Windows Server 2012 R2, added the mentioned NIC and getting regular crashes since then on the 2 VMs I created. Both guests are W2012R2...
View ArticleRe: Cannot pass ipv6 packets into a VM using VFs (82599)
Hi,Ipv4 multicast reception on VFs does not work either, same cause it seems, making it impossible to run OSPF on VFs. Any news on this issue ? Thanks Kristoffer
View Article82575EB onboard NICs support and teaming in W2012R2
Hi what is Intel's support plan on the 82575EB onboard NICs?I have them on 12 Intel S5520HC motherboards.Are driver updates being made for this nic/mobo? The drivers provided with windows 2012 R2 work...
View ArticleIntel PRO/1000 PT Dual Port Server Adapter & Win 8.164 bit = Memory Leak
My Intel PRO/1000 PT Dual Port Server Adapter has been working fine in Win 7 without issues but on upgrading to Windows 8.1 64bit I've found that Committed Memory would slowly increase over a week to...
View ArticleHow to enable DCA?
When I try to use the DCA (Direct Cache Access) function of the 82599 10Gbe NIC, I had difficulty in enableing it. The environment which I operated is as followed. 1.Intel(R) Xeon(R) CPU E5540 @...
View ArticleRe: Intel 82574L Broken - Win 2012 R2
macguy25 wrote: I did find a post on the forums on how to force driver install. It involves opening the .INI file and adding the device IDs under Intel.NTamd64.6.3. This also requires a restart after...
View Article