Re: Intel(R) 82579V Gigabit Network device issues
Created this account purely to say thank you so much! Been working on this all weekend. Vicky
View ArticleLinux drivers for X520-SR2 10G network adapter?
Hi, I'm trying to find drivers for an Intel 10G network adapter that we want to use with an HP server. The server has Ubuntu 12.04 LTS installed (3.8.0 kernel). I've looked at the instructions on this...
View ArticleRe: X520-DA2 issues with HP2910al / J9008A 10GB
Hey guys, sorry to **** in but I have a DA2 with supported intel SR optics and I haven't been able to resolve the following error...and i've given it both barrels. Any words of wisdom or...
View Articlei350 ethernet adapter disconnected during normal work
I'm using two i350 components (as two mini PCIe modules). Every module has i350 with x1 lane of PCIe and two 10/100/1000 ethernet interfaces. I'm using only 3 out of 4 ethernet interfaces available and...
View ArticleHow to check Intel PXE OROM version and PXE 2.1 build number?
Hello, Is there a way I can query the Intel PXE OROM version and/or the PXE 2.1 build number from within Windows 7? I have installed the Proset utilities but did not see these version number in Device...
View ArticleRe: I217-V unable to establish link at 1 Gb/s speed
Solved the problem. It was a bad patch cable.
View ArticleRe: I217-V No connection with 100 full duplex setting
Solved the problem. It was a bad patch cable for me.
View ArticleIPv6 multicast flood during sleep from i217-LM
There's a discussion on Dell's forums about the i217-LM causing a flood of IPv6 multicast traffic during sleep state. Is Intel aware of this issue? Is it a driver issue which has been addressed? Opti...
View ArticleI217-LM network adapter problem with 100MB full duplex
I recently updated my Microsoft Deployment Toolkit repository with the latest cabs to support new Dell laptop. After the site is updated, I started having problem with older Dell Desktop and laptop...
View ArticleRe: I217-LM network adapter problem with 100MB full duplex
We have the same issue on some new HP EliteDesk 800s with the i217-LM card. 100mb full just doesn't work. The switches are hard set to 100mb/Full but the PCs are reporting 100mb/Half when we set to...
View ArticleRe: I217-V No connection with 100 full duplex setting
Was this every fixed properly? We have latest drivers from intel, but can get 100mb/Full working. Our switches are hard set to 100mb/full but the PCs (HP EliteDesk 800s) are reporting 100mb/half and we...
View ArticleIntel i217-LM Duplex Problem
We have an issue with the networking on the built-in i217-LM Intel NIC on HP EliteDesk 800 PCs100mb full just doesn't work. Our Allied Telesis switches are hard set to 100mb/Full but the PCs are...
View ArticleRe: I217-LM network adapter problem with 100MB full duplex
Same issue with Dell Optiplex 9020's with with I217-lm card. Auto-negotiate works fine but the network requires 100mb/Full Duplex. When changing to this setting the NIC shows as no cable connected....
View ArticleProblem setting rx ring size using ixgbe on vSphere ESXi 5.1
I have a high throughput UDP application running on vSphere 5.1 and I am dropping packets due to rx_dma_no_resources (ethtool -S vmnic4). I have attempted to change the rx ring buffer size to 4096,...
View ArticleRe: Problem setting rx ring size using ixgbe on vSphere ESXi 5.1
The version of the driver you have is a bit dated. I would try the latest which available from VMware...
View ArticleRe: I217-LM network adapter problem with 100MB full duplex
We are having this same issue on our network Auto-negotiate seems to work fine only problem is some of our switches are set to 100/full.This problem started with our latest shipment of Dell 9020's and...
View ArticleHow to force install Intel Proset 18.8
Hello, I am looking to force an install of Intel Proset 18.8 where an Intel adapter is not yet present. We are a system builder and regularly build new server images for different Microsoft server...
View ArticleRe: Some VFs are assigned three IRQs and some receive only two
Hi Patrick,with the latest drivers you mentioned, we still see that MSI-X table for each VF has three entries, but each VF receives only two IRQs: 03:10.0 Ethernet controller: Intel Corporation 82599...
View ArticleRe: Some VFs are assigned three IRQs and some receive only two
We have recently added Mulit-Queue support to our SR-IOV solution. Multi-Queue (MQ) uses 3 interrupts, non MQ only uses 2; however the code still requests 3. I've asked engineering to look into this...
View ArticleRe: Problem setting rx ring size using ixgbe on vSphere ESXi 5.1
Updating to the latest driver worked and allowed me to tune the ring size. I was using the driver that came with an HP custom image. Thanks for your help!
View Article
