Re: 82599EN repeats Link Up and Down
Hi wb Thank you for your response. Yes, I keep the link up status with FINISAR FTLX8271D38CV on 1Gbps speed.I suspected the reference clock because the link up status could be kept on1Gbps. Then, I...
View ArticleRe: I try to install windows 10 on a ISCSI disk but during the second phase...
Hello Giuseppe,Were you able to try the recommendations on my previous post?Hope to hear from you again. Sincerely, Sandy
View ArticleRe: Random BSOD in Windows Server 2008 R2 due to elr62x64.sys
Hi Muralidhar,Please provide your specific network card model. Is it integrated to the motherboard or a separate card? Kindly provide the motherboard/system model. Thanks.Sincerely, Sandy
View ArticleRe: I211/I217-V Windows 10 LACP teaming fails
Can some one suggest a good alternative good ethernet adapter (Desktop Workstation ) which will support vlans in windows 10 and possibly in future windows versions,Thanks
View ArticleRe: I217 support removed from the UEFI Ethernet Driver
Sandy: OK. So please tell me which are the correct drivers for the i210 and the i217 then? The current release is fine for example purposes. i210 - ???i217 - ??? Thank You
View ArticleRe: Where do I get the tool for initializing an empty NVM (Flash) for the 82574?
Finally track down the problem. After stepping through the status/control registers with LANCONF32 I found that the NVMT status was wrong. After modifying the strapping of the NVMT/JTAG_TMS pin I was...
View ArticleRe: I211/I217-V Windows 10 LACP teaming fails
Hi Nizam, we use U2L 100P-Y1 from Lenovo. This is a USB 2.0 device. We also use a USB 3.0 adaptor from Lenovo but I don't have the part number in front of me.
View ArticleClik here to view.
Re: Intel X550-T2 Card not compatible to HP 1950-24G-2SFP+-2XGT-PoE+ Switch
Hi,i bought a qlogic qle3442-rj-ck dual port rj45 10gbps card, put it into my system, boot it up, installed all driver and it worked without adjusting or touching any setting.please intel i need a fix,...
View ArticleRe: 82599EN repeats Link Up and Down
Hi Taira, Thank you for sharing your test result. I am glad the issue is fixed and we will take note of this useful information.rgds,wb
View ArticleRe: I217 support removed from the UEFI Ethernet Driver
Hi Bob, Please use the files below: E0009X7.EFI is for I217 and E6604X3.EFI is for I210. Sincerely,Sandy
View ArticleRe: Random BSOD in Windows Server 2008 R2 due to elr62x64.sys
The network card model is Intel R Gigabit 2P I350-t Adapter The server type is IBM server 350 xseries
View ArticleRe: Cannot control XL710 VF interrupte rate
Hi JX, Please try use the following command and feel free to update me the result>Ethtool –c tx-usecs 125 rx-usecs 125, this should limit each queue to 8000 interrupts. Thanks,wb
View ArticleRe: Random BSOD in Windows Server 2008 R2 due to elr62x64.sys
OS Name Microsoft Windows Server 2008 R2 Enterprise Version 6.1.7601 Service Pack 1 Build 7601 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name PLAZA1 System...
View ArticleRe: Random BSOD in Windows Server 2008 R2 due to elr62x64.sys
If you need dump file and full system information ,we can upload based if you provide a link for the same.
View ArticleRe: Intel X550-T2 Card not compatible to HP 1950-24G-2SFP+-2XGT-PoE+ Switch
Hi Michael, I see. I'll follow thru this issue.Sincerely, Sandy
View ArticleRe: XL710-QDA2: TCP rx_crc_errors
Hope it won't take much time, because we are at the end of warranty period at the moment.
View ArticleRe: I211/I217-V Windows 10 LACP teaming fails
Thanks man, my requirement need a gigabit link. Will check some PCI Ex cards
View ArticleClik here to view.
Re: I217 support removed from the UEFI Ethernet Driver
Thank You Sandy. Please close this now.
View ArticleRe: XL710-QDA2: TCP rx_crc_errors
Hi AlexanderKlimenko, I will update you as soon as there is any finding. Are you referring to the network adapter warranty period? XL710-QDA2 covered a limited lifetime warranty.rgds,wb
View ArticleRe: I217 support removed from the UEFI Ethernet Driver
Hi Bob, Yes, I'll be closing this case now. It is my pleasure to assist you. Again, thank you for contacting Intel. Sincerely,Sandy
View Article