Re: Problems with 10Gb NICs and Nexus switches
We have had problems with Intel NICs and Nexus 5596 until we forced speed 10000 on the switch side. I suggest giving that a try to see if it help you with the 3064. Also, you say that you are having...
View ArticleRe: Problems with 10Gb NICs and Nexus switches
You are right, the 4900M is a Catalyst, not Nexus model. I have figured out a different solution in the meantime: enable flow control (switch side)/disable pause frames (NIC side, ethtool) when...
View ArticleClik here to view.
intel igb i354 issue with lack of multiqueue (intel atom C2758 board)
Hi there, I've been having some trouble getting igb/i354 to enable multiple queues. Despite compiling the latest igb module (5.2.9.4 at the time of writing this) I have not been able to enable it. I...
View ArticleWindows Server 2008 Standard Drivers for Intel® I217LM Gigabit Network adapter
Hi everybody,I am unable to find Network drivers for Intel® I217LM Gigabit Network adapter for Windows Server 2008 Standard (32-bit). I have found the drivers for Windows Server 2008 R2 but that being...
View ArticleUsing WGI210ISSLJXX without NC-SI???
Hello, I am currently trying to implement an I210 solution to convert PCIe from an Atom Processor to a SGMII interface to connect to a Marvell 88E6176 Ethernet switch. In this application I have the...
View ArticleRe: Intel 82579LM drops to 10Mbps from Gigabit, refuses to go back
I've had this exact same problem with an Intel(R) 82579LM Gigabit Network Adapter onboard my Dell OptiPlex 790 running both Windows 8 and 8.1. I've installed the recent (08/08/14) driver release...
View ArticleServer to server connection with use of 2x Intel x520-DA2 10Gb Network...
I Wonder if there is possibility to connect two servers directly (without switch or switches) with use of 2x Intel x520-DA2 10Gb Network adapters and Intel Ethernet SFP+ Twinaxial Cable XDACBL3M....
View ArticleClik here to view.
Problems with "Intel PRO/1000 PT Dual Port Server Adapter" (EXPI9402PTBLK)...
Hi i'm using this adapter for an industrial application and the two ports is wired directly to two other pc:s. It's working fine however every now and then (maybe once a week) the connection is lost...
View ArticleMake install fail for ixgbe-3.22.3
Any thoughts on below, when try to make install ixgbe-3.22.3 src? thanks! make installmake -C /lib/modules/2.6.39-400.214.3.el5uek/build SUBDIRS=/tmp/ixgbe-3.22.3/src modulesmake[1]: Entering...
View ArticleINPUT CAPTURE WITH GALILEO GEN 2
Hi,i'm a new engineer and i have a project with this. I have a sensor with output is a pulse. I think that i can use the Input Capture but dose the Galileo Gen 2 have it and how about the Example code...
View ArticleRe: intel igb i354 issue with lack of multiqueue (intel atom C2758 board)
Hi Iakovos - I am an Intel Applications engineer. Could you please send your information to one of the following for a response: 1) File a bug on the e1000 SourceForge mailing list...
View ArticleRe: X520 pxe enable without OS
Hello,Have you configured the BIOS setup on this machine so that the PXE boot is enabled and the network port is setup as the primary boot device? These settings are different from manufacturer to...
View ArticleClik here to view.
Re: intel igb i354 issue with lack of multiqueue (intel atom C2758 board)
Hi Paul, Many thanks for your reply. It's much appreciated and nice to see that intel employees show interest in customers' problems (makes a nice change sometimes)! As I needed a working...
View ArticleRe: Windows Server 2008 Standard Drivers for Intel® I217LM Gigabit Network...
Hello,Unfortunately Microsoft Windows* Server 2008 does not support the Intel(r) Network connection I217-LM. There may be in-box drivers with the operating system installation.
View ArticleRe: Problems with "Intel PRO/1000 PT Dual Port Server Adapter"...
Hello,Have you checked the power management settings for any of these systems? Try disabling power management for the adapter and LAN ports on the other two machines. Once you find out what driver...
View ArticleRe: Server to server connection with use of 2x Intel x520-DA2 10Gb Network...
Hello,You can directly connect (2) X520-DA2. No crossover cable is required and no switch is required. Just make sure to use a quality cable and avoid running the Ethernet cable in parrellel with...
View ArticleRe: Hyperscan DPI
Hello,The public information we have available on our website for datacenter performance is located at the URL below. Contains performance information and details about the test configurations. Hope...
View ArticleClik here to view.
Re: Server to server connection with use of 2x Intel x520-DA2 10Gb Network...
Hello Robert,thank you for your answer. Can i use Intel Ethernet SFP+ Twinaxial Cable XDACBL3M for such connection, somebody told me that this kind of cables are desinged for connection with switch and...
View ArticleClik here to view.
Re: Problems with "Intel PRO/1000 PT Dual Port Server Adapter"...
All the power savers are disabled, the version of the intel proset is 16.3.48.0 and the driver version is 9.13.41.0, there are much more newer drivers but only for windows 7 and they wont install on xp..!
View Articlei40e nics are down when we use them on Dual CPU
Hi All, When we use netperf to generate traffic, i40e nics are down very soon(the throughput is about 76Gbps). CPU: "Intel(R) Xeon(R) CPU E5-2670 v2 @ 2.50GHz" X2 TOPO:port5, port6, port11, port12 are...
View Article