Clik here to view.
Re: Problems with "Intel PRO/1000 PT Dual Port Server Adapter"...
Hi Brillfors, I've tried using 7-zip to extract the installer to folders, xp 32-bit driver downloaded from https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18717 hope this helps.
View ArticleRe: I218-V Wake On Lan broken with Fastboot - Bug
Thanks for the response, I should have mentioned in my first post that I also tried doing what you've suggested and this does not work. To clarify: Enabling stack driver support under boot options and...
View ArticleClik here to view.
Intel(R) 82577LC Gigabit Network Connection is not working
My NIC stops working by showing an . I disabled it., uninstalled, tried to update it, the problem remains the same. Shutting down the computer or Reboot it will prompt the error message: PXE-E05:...
View ArticleRe: Intel(R) 82577LC Gigabit Network Connection is not working
Hi Josendy, The eeprom on the NIC is corrupted, you can try reflashing the eeprom by checking with your laptop vendor for BIOS update. Thanks,wb
View ArticleRe: Intel Ethernet Connection I218-LM - Wake Up issues
Thanks, Sage. I think my issue with LAN has already been resolved after performing unfathomable hours at home. My outstanding issue about connecting to a non-production connection appears also to be...
View ArticleI can't install Intel WiDi latest build 4.2.29.0 on Windows 8.1
Hi, when I try to install on my NUC D34010WYKH2 + Intel Dual Band Wireless-AC 7260 the latest build of WiDi program on Windows 8.1, I get the message that the OS isn't compatible! How it's possible?...
View ArticleClik here to view.
Re: Intel(R) 82577LC Gigabit Network Connection is not working
Hi wb_Intel, I downloaded the latest BIOS image file and tried to install it to find out that my Laptop is already using the same BIOS image as BIOS ROM, as you can see below. What else can I do?
View ArticleWake On Lan
Hi, Is the intel lan chip I217 can support Wake On Lan after remove AC -> plug ACIf yes, how to use it?If not, why? Any limitations?
View ArticleClik here to view.
Dual MAC addresses
I have installed Intel Pro/1000 dual (EXPI9402PTBLK) - with two ports/connections.My software tells me that I have two MAC adresses but how do I know which one belongs to upper/lower port ?
View ArticleRe: Dual MAC addresses
Hi Pelleplutt, Here is what you can do to identify the port with its corresponding MAC address.Download and install the PROSet software in case you have not done this yet...
View ArticleRe: Dual MAC addresses
Thanks for you answer.I am doing an installation from scratch - don't have any OS in the computer where the NIC is.Don't want to buy a license of Windows and install it just to get the MAC addresses.Is...
View ArticleClik here to view.
Network Connections 19.3
Hi,I recently installed Network Connections 19.3.141.0 for a 82579LM LAN adapter and all appears OK, except when looking at the driver Link Speed tab, Link Status is displaying "1.00 GbpsNotAvailable"...
View ArticleRe: Problems with "Intel PRO/1000 PT Dual Port Server Adapter"...
Thanks is that the correct drivers? i cant see the PT dual port server adapter in there... If i search the download center i cant find a single driver for xp.
View ArticleRe: Problems with "Intel PRO/1000 PT Dual Port Server Adapter"...
unfortunately, winXP is not under the supported list of OS for PT Dual port, kindly refer to the product brief - Intel® PRO/1000 PT Dual Port Server Adapter Product Brief .
View ArticleRe: I218-V Wake On Lan broken with Fastboot - Bug
thanks for the update, have you tried using a discreet network adapter to further isolate the issue? how'd you perform the magic packet thru magic packet?
View ArticleRe: I218-V Wake On Lan broken with Fastboot - Bug
Sent magic packet using router tool and through an android function I use daily which works fine with fastboot off, and works fine with fast boot on on every other device I have (this is the only Intel...
View ArticleRe: Network Connections 19.3
Hi Pauld_123, have you tried lower version of the software such as 19.1 (https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24175 ) or 18.8...
View ArticleRe: Network Connections 19.3
Thanks for responding sage99,Switch reporting 1Gbps full duplex.NC 18.7 displays correctly - "1Gbps/Full Duplex".NC 19.1 did not update driver (same version 12.10.28.0 as supplied with18.7 for 82579LM...
View ArticleRe: Issues with X540-T2 - no signal.
Hi Spiral, some suggestions below:1. try to load the latest 19.3 driver package (win7 64bit) found in this site - https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=187132. try to run the...
View ArticleRe: Dual MAC addresses
Hi Pelleplutt, Diags.exe of proadmin.exe package - https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=4237&lang=eng can show the mac address w/out going to the windows system. 1. copy the...
View Article