Clik here to view.
Re: Intel® 82579LM UDP multicast packetloss
Hi ikazimirs, What is the BIOS version on your HP z220? Please try update the BIOS to latest version. thanks,wb
View Articleixgbevf/ixgbe compatibility
I've seen a couple of postings in this forum (each going back a year or more) with responses from Intel suggesting that the two drivers are tightly coupled due to the messaging/mailbox interface. Is...
View ArticleClik here to view.
Re: Any resolution for onboard 82578dc NIC Code 10 Error?
I have the latest mobo BIOS, Intel chipset, and Intel x64 proset driver. Haven't tried any other OS (since this was a fresh Win 7 x64 install). In the many threads I've read on this issue, there have...
View ArticleClik here to view.
Asus Maximus VII Formula W/ On-Board Intel I218V won't connect at 1gbps
I just built this computer yesterday and have updated all BIOS and Drivers along the Motherboard I am connecting to a linksys wrt 1900AC with a Cat6 cable that was used on my older computer(connecting...
View ArticleAsus Z87 Pro will not boot with a Intel X540-T2
Hello I just purchased a couple of Intel X540-T2 10GBE cards. Unfortunately my Asus X87 Pro motherboard will not boot with either of these NIC. I updated the BIOS of the motherboard to the latest...
View ArticleClik here to view.
Re: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
Issue is still unresolved. Bumping thread for viability. Would greatly appreciate a response.
View ArticleRe: Asus Z87 Pro will not boot with a Intel X540-T2
Hi Charles, Did you try disabling any onboard NIC to test? With regards to the compatibility, you can check with Asus since most board vendor has validated hardware list for the system....
View ArticleClik here to view.
Re: Asus Maximus VII Formula W/ On-Board Intel I218V won't connect at 1gbps
Hi Starvin_Marvin, Can you check if can force the gigabit port speed on the Linksys WRT 1900AC router to 1 Gbps? I checked on the tech spec, this router has 4x Gigabit LAN port. Just to...
View ArticleRe: Debian Wheezy with Intel I350-T2 bonding issue
@vince_intel, any news regarding building igb driver without anti spoof? Or module knob to turn it off? Regards,
View ArticleClik here to view.
Re: Intel® Ethernet Converged Network Adapter X710-DA4
I have a similar Issue. Supposed these cards are on the VMware HCL but the firmware shipped does not match the rev 4.2.4 listed and I cannot find the update.Neither VMware or HP are willing to help...
View ArticleLancard promiscuous mode (etw loggin) problem
Hello. With Intel Lancard (Intel® pro/1000 PT Dual port server adapter), We used it for Packet Mirroring System. When Promiscuous mode was set and IP address was not set to that card.It seems that...
View ArticleRe: Intel® Ethernet Converged Network Adapter X710-DA4
Hi InfiniteIT-Chris, Thank you for the information. Can you provide what is the Vmware driver version used? Do you have any reference number from Vmware support regarding firmware...
View ArticleRe: Lancard promiscuous mode (etw loggin) problem
Hello Ihopi, Hello Svt11, thanks a lot for posting your question at Intel communities; however I’m going to move your thread to the Wired community. Regards,
View ArticleRe: Intel® Ethernet Converged Network Adapter X710-DA4
I am using the same drivers on the HCL: i40e version 1.1.1.VMware vSphere 5: Private Cloud Computing, Server and Data Center Virtualization ESXi shows the firmware on my cards as 4.22 but the supposed...
View ArticleClik here to view.
Re: Intel® Ethernet Converged Network Adapter X710-DA4
Here is the Intel Ticket with all the info. 8001038776 This experience with Intel was the worst I have ever seen with a tier one manufacture, how can a business operate with zero support from the...
View ArticleChange MAC address of SR-IOV Virtual Function inside VM
Hi. Is any way to change MAC address on VF inside VM without touching host?Is it possible to add additional MAC addresses which NIC's driver pass through VF When MAC inside VM is changed via $ sudo ip...
View ArticleIntel 82579LM - Error code 10
Hello, Upon reboot my network card fails to start with error code 10. I have tried disabling and re-enabling, re installing with current drivers and of course reboots all did nothing. Now im trying to...
View Article82579V network adapter not recognized by PROset software
Details:Windows 7 64 bitGigabyte GA-Z77x-up5 th motherboard (F4 bios)Recently installed 7260 ac HMWG wireless card. 17.1 driver Working fine. 15 MBS Problem: The network interface (wired) was only...
View ArticleRe: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
Would like to update this thread with more info in hopes of a response from Intel. I've noticed that If I unplug the Ethernet jack while leaving the device enabled the problem goes away. So it would...
View ArticleCT-2 Cable detection error
Hi, I've recently installed a CT-2 network card (pic-e) on my XP pc. After startup the card reports 'no cable connected'. When I deactivate the network connection in windows and afterwards enable it...
View Article