Re: 82579V in vlan not respond to requests
Hi Whoa, Do have other system that connects to the same cisco switch that is working properly with vlan configured? you can try to compare the configuration of switch port and VLAN settings on the...
View ArticleRe: i218-LM code 10 after restart without cable
Hi dh29, when using the Intel driver, have you tried to tweak on the wake for link option in advanced properties, try setting this to "off". regards,vince
View ArticleRe: Remote Booting Z800
Hi The3DStig, suggest you to check with HP on the detailed setup, you might need to update your BIOS and setup DASH to implement the remote management capability of your system, some reference from the...
View ArticleRe: Nothing but problems with Intel pro 1000 mt, teaming, etc
That's weird because by installing either the 19.5 driver or the 18.4 driver I get teaming. I can configure a team. All works except the connection will NOT accept a static IP address, nor will the...
View ArticleRe: Nothing but problems with Intel pro 1000 mt, teaming, etc
I'm currently uninstalling all the intel stuff, will purge out whatever I can, reboot and start over w/ the 18.4 drivers. See if maybe this problem can be resolved somehow.
View ArticleRe: Nothing but problems with Intel pro 1000 mt, teaming, etc
typo, that should be 18.5 drivers
View ArticleClik here to view.
Re: XL710 QSFP NICs: will a 4xSPF breakout give me 4 ethernet ports?
Vince, Thanks for your quick response. j.t.
View ArticleRe: "No probed ethernet devices" when use Intel Ethernet Server Bypass...
Hi MinhMinh, Thank you for the post. We will further check on this. rgdswb
View ArticleRe: I work on intel WG 82583 and I have problem to program falsh memory
Hi BEN87, the 82583 is a ethernet controller , what is the exact board model? wb
View ArticleRe: Nothing but problems with Intel pro 1000 mt, teaming, etc
HI MonsterMaxx1, The teaming may or may not be possible, as mentioned in our FAQ " This depends on the selected ANS functions enabled in the team. Because there are a number of possible combinations,...
View ArticleRe: Keeping network settings after driver update?
Hi dbrb2,Thanks for the info. we will check on this. rgds,wb
View ArticleRe: Keeping network settings after driver update?
ThanksNote the settings that vanish are on the VLAN interface since we use VLAN tagging at the PC
View ArticleRe: Keeping network settings after driver update?
... Though problem still exists if we don't use VLAN tagging
View ArticleRe: Keeping network settings after driver update?
Hi dbrb2, Just few quick questions again, how many units were affected? are you using the latest driver version 19.5? at Intel® Download Center rgds,wb
View ArticleRe: Keeping network settings after driver update?
HiAny machine we tried was affected, which would have been about 300 except that we stopped deployment when we found this problem. The version of prowin32 was the latest I could find in the download...
View ArticleRe: Keeping network settings after driver update?
Note we were running prowin32.exe in silent install mode from a remote terminal rather than installing manually on each box
View ArticleClik here to view.
Re: Keeping network settings after driver update?
Ok - yes the latest proWin32.exeWhen installed, the driver version shows as 12.10.29.0 from 02/05/2014 Prowin32 was installed silently using the "/s" flag from a remote command prompt
View ArticleClik here to view.
After regular shutdown - Intel 82579LM - This device cannot start. (Code 10)
Hi guys,Sorry that I create new post but this thread (Intel 82579LM - Error code 10) is little bit different cause LcsFletcher have different problem. On my motherboard Intel DX79SI, there are 2...
View ArticleClik here to view.
Re: Nothing but problems with Intel pro 1000 mt, teaming, etc
Well, to the best of my ability, this card will not support any kind of performance teaming. If you know how to get it done I'm all ears, but I've tried every combination I can conceive of. Fault...
View ArticleRe: Does Intel support SFP+ optics with dual RX?
Dear Intel, Kindly refer to my last post:Are there any Intel SFP+ optics and NICs that can be usedto receive 2 RX optical signals in single SFP+? Regards, Igal Manelis.
View Article