Re: XL710 VF driver can reply to ARP request but cannot reply to ICMP's
Hi Animy, Thanks for the additional info. I'm still checking it.I'll get back to you once I have any updates. Sincerely, Sandy
View ArticleRe: I217-LM huge packetloss with WaitAutoNegComplete=On and...
thanks, it is a really weird problem, but easy to reproduce. Let me know if you need more info.
View ArticleRe: Blue screen with 82599 10 GbE Controller
Hi mrrorschach, Thanks for providing the additional details. This is helpful for us to study your case.In relation to item #3, I understand you are only seeing the issue using the latest driver ver...
View ArticleRe: Where can I find a map of registers Ethernet Switch FM4112?
it is not theethernet-switch-fm2112-datasheet.pdf (section 5.2) Register Mapethernet-switch-fm4000-datasheet.pdf not section of Register Map
View ArticleRe: ixgbe LLIpush does not seem to work correctly
LLIPush=1, all other settings are left at default and I have not tested them.
View ArticleRe: ixgbe LLIpush does not seem to work correctly
Hi JasonSeba,Thank you for the info.will check on this. rgds,wb
View ArticleRe: i218-LM code 10 after restart without cable
Hi dh29, Please try try enabling Wait for Link in case you have not tried that. Check also the adapter advance features should be disabled when the cable is disconnected. You may also check with...
View ArticleRe: I217-LM huge packetloss with WaitAutoNegComplete=On and...
Hi Reni, Here are some suggestions you can try:1) Change the setting of Reverse side scaling 2) If wait for link causes this issue to occur, possibly the Windows Network service is not staring...
View ArticleRe: I217-LM huge packetloss with WaitAutoNegComplete=On and...
Hi wb, 1) i tried disabling Receive side scaling, unfortunately this doesn't help.2) yes this issue is caused by wait for link, we need this setting, because otherwise the driver reports that it has...
View ArticleRe: I217-LM huge packetloss with WaitAutoNegComplete=On and...
Oke the HP i have here doesn't have the I217-LM but the I218-LM and this doesn't have this issue.I found a Dell Optiplex 9030 AIO with the same I217-LM nic, did the same tests, but this model doesn't...
View ArticleRe: Where can I find a map of registers Ethernet Switch FM4112?
Hi microelectron.ru, I'll further look into this. Sincerely, Sandy
View ArticleRe: I217-LM huge packetloss with WaitAutoNegComplete=On and...
To make it even more confusing, connection starts to work correctly without packetloss after using the diagnostic tool that comes with the intel driver.But whenever i disable/enable the nic afterwards...
View ArticleRe: Intel I350 NIC Teaming Issue
Test bcdedit /set nx alwaysoff, Data Execution Prevention (DEP).
View ArticleRe: Intel 82579LM Gigabit
Hello Sandy, your recommendations helped me solve the speed transfer between my pc´s but the problem now is a Mac that I have in the same network. It does not allow me to r/w at the same time. in...
View ArticleRe: Intel® I350 Quad GBE Controller
Hi AGXINJ Please use the SGMII NVM instead of the Serdes NVM for SFP mods. Hope this helps. rgds,wb
View ArticleRe: i40e sr-iov packets latency
Hi GroundSea, Please refer to the website for Intel® Data Plane Development Kit (Intel® DPDK) at...
View ArticleRe: Intel 82579LM Gigabit
Hi RescateHistoricoNetworks, you can try to match the settings of your mac to the ones set on pc's and check if this would help. regards,Vince
View ArticleRe: i218-LM code 10 after restart without cable
Hi wb_Intel, As 'vince_Intel' suggested back in February, I have already tried setting the 'Wait for Link' to OFF. This made no difference to the problem. I can confirm that when the cable is...
View ArticleRe: Where can I find a map of registers Ethernet Switch FM4112?
Hi microelectron.ru, Please contact our business link support with regards to the missing Register Map information on the ethernet-switch-fm4000-datasheet.pdf.You may find the contact details below:...
View ArticleRe: Rate limiting on Virtual Function
Hi Vince, we have a similar problem. lspci reports our card as03:00.0 Ethernet controller: Intel Corporation Ethernet Controller 10-Gigabit X540-AT2 (rev 01) We use the following drivers on the machine...
View Article