Re: How to add ntuple filter with different masks?

Hi labrisnetworks,

      You may refer to this website

https://www.kernel.org/doc/Documentation/networking/ixgbe.txt

      Please refer to Intel Ethernet Flow Director:->Other ethtool Commands:

To enable Flow Director     ethtool -K ethX ntuple on

To add a filter   Use -U switch. e.g., ethtool -U ethX flow-type tcp4 src-ip 10.0.128.23         action 1

To see the list of filters currently present:     ethtool -u ethX

Hope this helps.

rgds

wb