Re: Debian Wheezy with Intel I350-T2 bonding issue
Do any of you know how to compile the driver without anti spoof detection? Regards,
View ArticleRe: Enabling adapter causes system runs out of memory.
Hi wb, No, I'm sorry.Yesterday I installed the lastest driver which I had downloaded from Supermicro, but the problem still consists. Regards,Alfred
View ArticleRe: duvida sobre bloqueio
This question is a duplicate of duvidas sobre o bloqueio automático. See duvidas sobre o bloqueio automático to follow this conversation. I'm locking this thread. Mark HannaCommunity Manager
View ArticleRe: adding a PF to a linux bridge
Also, the NIC I am using interl fortville with the i40e driver.
View ArticleRe: Enabling adapter causes system runs out of memory.
Hi Alfred, Thank you for the update. Please try upgrading the BIOS from the system. Have you also check compatibility with Supermicro to isolate the issue? Thanks,wb
View ArticleClik here to view.
Re: process 4 receive packets only after 4 tx packets processing happened
Hi animy, Good day. Upon checking the info you've provided, we found that the adapter's firmware is quite old. We suggest to update the firmware on the adapter. The firmware is available here - NVM...
View ArticleRe: SR-IOV with ixgbe - spoof packets detected
Hi Shaham, Yes, you are correct. To change the MACAS and VLANAS, it is necessary to recompile the driver. To further check on your configuration, we would like to request for your system details....
View ArticleRe: adding a PF to a linux bridge
Thanks raghurampv, we're checking on this and will get back to you with our findings. Sincerely, Sandy
View ArticleRe: process 4 receive packets only after 4 tx packets processing happened
Hi Sandy,When i update adapter's firmware I met the problem" Intel(R) Ethernet Converged Network Ad 8086-1584 02:00 Access error"after execute the command" ./nvmupdate64e -l nvmupdatelog.txt"Could you...
View ArticleClik here to view.
ESXi 6 X710 Port Speed configuration
I have several X710-DA2 cards in the ESXi Server. When I leave the port speed of that cars as it is everything works fine. When I try to change the speed to 10GBit I get an error message: "Forcing...
View ArticleClik here to view.
Re: Intel 82579V Issue
Hey guys, my system got into this "This device cannot start (Code 10)" with the Intel 82579V recently and i tried all sorts of methods to fix it. Most of the methods failed as expected like all the...
View ArticleRe: Multicast not working Intel X710-DA4
Hi Sandy, We already had the latest version, not sure how I can find that number?The card itself is an Intel X710DA4
View ArticleRe: Debian Wheezy with Intel I350-T2 bonding issue
Hi Bartek_K,we will check on this. rgds,wb
View ArticleRe: ESXi 6 X710 Port Speed configuration
Hi Steffen_ST, Thank you for the post. What is the switch model the X710-DA2 connets to? Let me further check on this also. rgds,wb
View ArticleRe: Multicast not working Intel X710-DA4
jimmy1987, I have run in to some similar behavior when running CentOS 7 and RHEL 7 and found that the issue was the firewalld was blocking multicast and other traffic. I had a VXLAN configuration using...
View ArticleRe: process 4 receive packets only after 4 tx packets processing happened
Hi Sandy, I have test my driver after firmware and i40e linux driver updated and there is no chage in result.driver: i40eversion: 1.2.38firmware-version: f4.33.31377 a1.2 n4.42 e1930the result ping...
View ArticleRe: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
Hi Hlidskjalf, Here is the latest update about the issue. For Panther Point chipsets + Lewisville (82579) architecture, Management Engine/AMT accesses the network hardware every 4-5 seconds,...
View ArticleRe: How to add ntuple filter with different masks?
Hi labrisnetworks, You may refer to this website https://www.kernel.org/doc/Documentation/networking/ixgbe.txt Please refer to Intel Ethernet Flow Director:->Other ethtool Commands:To...
View ArticleRe: Multicast not working Intel X710-DA4
Hi thehevy, It's not the firewalld blocking. Why my other NICs are good to receive multicast pkts?Can you work around with my test? server | |...
View ArticleRe: adding a PF to a linux bridge
Dear raghurampv, Please refer to section 12 of this document. It discusses all about Virtio vs SRIOV implementation. http://dpdk.org/doc/intel/dpdk-prog-guide-1.7.0.pdf Feel free to contact us again...
View Article