Clik here to view.
Re: SR-IOV with ixgbe - spoof packets detected
Hi Shaham, Thanks for the details. We'll check on this. Sincerely, Sandy
View ArticleRe: process 4 receive packets only after 4 tx packets processing happened
Hi Animy, Thank you for posting the test results. We'll further check on this issue. Sincerely, Sandy
View ArticleRe: Multicast not working Intel X710-DA4
Unfortunately that was not it as we tested before with centos 6 and 7 and with and without firewall / iptables. It seems it can transmit them but not receive them.
View ArticleRe: I217-LM huge packetloss with WaitAutoNegComplete=On and...
Hi Reni,I am sorry for the late reply. So the HP 800 G1 AIO which also uses I217-LM does not exhibit this kind of issue. Can you provide me the device ID?I might be mistaken but I think you mentioned...
View ArticleRe: How to add ntuple filter with different masks?
Hi. Thanks but your answer isn't helpful at all. I know how to use ethtool. My question was that what is the reason I got the error "only one mask supported per port"? Is there any way to solve that...
View ArticleRe: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
Thank you very much for the reply. I too have the DPC latency issue with my Asus P8z77-i deluxe. How do i disable ME? I cannot find an option in the bios settings.
View ArticleRe: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
Hi smakkerlak, Press CTRL-P is one way to enter the ME BIOS. However, 3rd party system vendor might have a different setup, you may check with Asus support on how to enter ME setup on your...
View ArticleRe: How to add ntuple filter with different masks?
Hi Labrisnetworks, Thank you for the reply.I will further check on this. rgds,wb
View ArticleRe: adding a PF to a linux bridge
Hi Sandy, I guess this issue didn't correlation with dpdk, because I met a similar issue when using XL710 in openstack system. I have a host install RHEL and openstack system, and set a XL710 NIC as...
View ArticleRe: I217-LM huge packetloss with WaitAutoNegComplete=On and...
Hi Rich, >So the HP 800 G1 AIO which also uses I217-LM does not exhibit this kind of issue Can you provide me the device ID??Correct, DeviceID is:...
View ArticleClik here to view.
Re: adding a PF to a linux bridge
Hi GroundSea, We suggest to try the dpdk program. You may refer to the documentation in my previous post. Feel free to update us on the results so we can further check on this issue. Sincerely, Sandy
View ArticleRe: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
I looked into the management engine firmware and drivers, but I have no idea if I can just flash the latest 8.xx 1.5m firmware or if I have to stick with whatever is part of the latest bios for my...
View ArticleRe: Intel I218-V - slow transfers FROM gigabit capable devices
Any more suggestions? I am about send the board back to the retailer next week.
View ArticleRe: Multicast not working Intel X710-DA4
Hi Sandy, Any update on this? Thanks. Regards,Rui
View ArticleRe: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
Hi smakkertak, The ME is to be disabled in BIOS. rgds,wb
View ArticleRe: Intel I218-V - slow transfers FROM gigabit capable devices
Hi Voldemarz, Thank you for the follow up. We are still checking on this and will update you as soon as there is any finding. Apologize for any inconvenience this might have caused. rgds,wb
View ArticleRe: I217-LM huge packetloss with WaitAutoNegComplete=On and...
Hi Reni, Thank you for providing the info. We will further look into this. rgds,wb
View ArticleRe: adding a PF to a linux bridge
Hi Sandy, I have tried the dpdk virtio driver. It seemed PF can forward the broadcast packet(ARP request) to the VM, but unicast packet(ICMP Echo request) can not be forwarded to the VM. Below is the...
View ArticleRe: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
Asus replied that there is no way to disable ME on this board, so its 19.1 for me. There's some info around on modifying firmware yourself but that seems like too much work Thank you very much for your...
View ArticleRe: Multicast not working Intel X710-DA4
Hi RuiGuo, thanks for following up, we are checking on this. Hi jimmy1987, I understand you are using SR module, please confirm if you are using this model E10GSFPSR. Sincerely, Sandy
View Article