Re: I219-LM & I210-T1 Teaming
Hi ARnoldo, I am sorry we do not have yet the information when the I219-LM and I210-T1 will support teaming in Windows 10. So far teaming is not supported in Windows for other Intel model.rgds,wb
View ArticleRe: I try to install windows 10 on a ISCSI disk but during the second phase...
Hi Giuseppe,Thank you for your information. I'll further check on this and will update you accordingly. Sincerely,Sandy
View ArticleRe: Please help with receive setup of a 82574 based NIC
Hi Avi, Thank you for the additional information provided. We will further check on your inquiry.rgds,wb
View ArticleRe: 82599EN repeats Link Up and Down
Hi Taira, Thank you for the post. Have you tried using the newer version...
View ArticleRe: ISCSI boot
Hi Gluesppe, Good day. I found you have similar query posted and is being supported by Sandy. Please update me if you still further assistance for this thread?Thanks,wb
View ArticleRe: What is the operating temperature for the QSFP+ and QSFP+ breakout cables?
Hi gar\yeohchux, Thank you for contacting Intel. The operating temperature of Intel® Ethernet QSFP+ Optics is 0 to 70°C. However, there's no operating temperature for cable since it doesn't have...
View ArticleRe: Connector connection to Chassis GND?
Hi gar\yeohchux,Good day. The network card does not need to connect to Chassis GND. You may contact chassis manufacturer for more information on chassis grounding. Hope this is helpful. Sincerely, Sandy
View ArticleRe: linux e1000e compile error 2.6.27.7 no member named 'dev'
Hi L, Have you also contacted HP* for support as this is an onboard NIC on their system. They might have the customized driver. Just to double check if you have tried version 3.3.4 posted on...
View ArticleRe: What is the operating temperature for the QSFP+ and QSFP+ breakout cables?
Hi Sandy,Do you know why there is no stated operating temperature for Intel Ethernet QSFP+ breakout cable under Product briefs?Intel® Ethernet QSFP+ Cables Product Brief I saw Intel Ethernet SFP+...
View ArticleRe: Connector connection to Chassis GND?
Hi Sandy,Actually customer planning to connect the connector to Chassis GND. They would like to know whether there would be a problem with that? If not any collaterals show that is no an issue?...
View ArticleRe: Connector connection to Chassis GND?
Hi Patrick, The chassis ground is required on some server chassis to make the current return easier and more efficient. Connecting it will not affect the network card or any other components in your...
View ArticleRe: What is the operating temperature for the QSFP+ and QSFP+ breakout cables?
Hi Patrick, Thanks for writing back.The breakout cable didn't have operating temperature is because it doesn't have any components that is operating in it. Sincerely,Sandy
View ArticleRe: WGI210IT Device ID issue
HI Sandy, Thanks for the concern.I did contact Intel Business Link Support. But I was unable to post the issue to them for few days, then finally I posted it 2 days back. But the response from there...
View ArticleRe: linux e1000e compile error 2.6.27.7 no member named 'dev'
Both the sourceforge e1000e-3.3.4 and the Intel e1000e-3.3.4 are the same. Intel just posted theirs before sourceforge got it out there 3 days ago.I had tried both e1000e-3.3.4 and e1000e-3.3.3 -...
View ArticleRe: X710-DA4 - SR-IOV not working correctly
The sticker on the front has: <MAC address>008 5214ADH58361-002 The sticker on the back has: INTEL(R) ETHERNET CNA X710-DA4 FH932576X710DA4FHBLK Date of Manufacture12/2014Made in Malaysia
View ArticleRe: linux e1000e compile error 2.6.27.7 no member named 'dev'
Hi L, Thank you for the feedback, we will further check. and have you also tried contacting HP* support as I understand you are using HP probook 640G2 (laptop).Thanks,wb
View ArticleRe: x710 disconnects with offloading enabled
Hi Jon, Please try update NVM to the latest version which is 5.04https://downloadcenter.intel.com/download/24769/NVM-Update-Utility-for-Intel-Ethernet-Converged-Network-Adapter-XL710-and-X710-Series...
View ArticleRe: Please help with receive setup of a 82574 based NIC
Hi Avi, Just to double check have you tried contacting Intel Israel and if they could assist you from there also? Thanks,wb
View ArticleRe: WGI210IT Device ID issue
Hi Nanjunda M,Thank you for your reply. Glad to know that you were able to obtain the tool and fix your network connection. Have a great day!Sincerely, Sandy
View Article