Re: What is the operating temperature for the QSFP+ and QSFP+ breakout cables?
Hi Sandy,Follow up questions.So the QSFP+ twinaxial cables and breakout cables do not comply to the commercial temperature range of 0-70C and do not have operating temperatures? If so, why is there a...
View ArticleClik here to view.
Re: Connector connection to Chassis GND?
Hi Sandy, Because of customer are planning to connect the connector to Chassis GND, they would like to know whether there would be a problem with that? There will be connecting the SFP+ connector to...
View ArticleRe: x710 disconnects with offloading enabled
Hi Jon,Thank you for the clarification. Since this is a Dell OEM adapter, we still recommend to use the Dell's driver and firmware version. For the meantime, let me further check also.Thanks. rgds,wb
View ArticleRe: linux e1000e compile error 2.6.27.7 no member named 'dev'
Hi L, Just to double check you are referring to HP* does not have the Linux driver for the onboard I219 NIC on your HP* notebook? rgds,wb
View ArticleRe: X710-DA4 - SR-IOV not working correctly
Hi Jailbird, Thank you for the information. we will further check on your inquiry,rgds,wb
View ArticleClik here to view.
Re: What is the operating temperature for the QSFP+ and QSFP+ breakout cables?
Hi Sandy, I am attaching picture for you as reference. This is the heasink customer mention on it.What purpose attached heatsink for the QSFP+ connector?Regards,Patrick
View ArticleClik here to view.
Re: Intel network driver interfering with audio
Dear Ghost314,I see you have installed the driver. Please continue to observe and in case the issue re-appears, please contact Asus* for further assistance.Sincerely, Sandy
View ArticleRe: Intel PRO1000/PT network card not showing up on PCIe bus one certain systems
Hi Joren, Thanks for sharing the manufacturer's remarks with us. This will be helpful for other users encountering similar issue.Again, thank you for contacting Intel.Sincerely, Sandy
View ArticleRe: 82599EN repeats Link Up and Down
Hi wb I tried to use ixgbe ver4.3.15. But the issue is occured again.I can not resolve this issue. eth2(target eth) status is as below. [staus result]root@socfpga:/usr/fsim# ethtool eth2Settings for...
View ArticleRe: x710 disconnects with offloading enabled
Hi Jon, Additional information here. Do you find any error in the event log related to the BSOD?Have you also check with Dell regarding this error and also refer this knowledge base...
View ArticleClik here to view.
Re: X/L710, FreeBSD VF per VF performance
Hi Chintu, Please confirm if you have updated the VF driver to the version on our website below:version 1.4.6...
View ArticleRe: What is the operating temperature for the QSFP+ and QSFP+ breakout cables?
Hi Sandy,Is there any issue or impact if without heatsink attached above QSFP+ connector? Regards,Patrick Yeoh
View ArticleRe: i210 FLUPD bit set by write to EEWR? / datasheet description for...
Hi wb, The CPU is a Freescale i.MX6 quad core Cortex A9.I've got no NDA with intel yet. Best regards,Lo2
View Articlei210 EEPROM contents: CopperTP vs. FIBRE
Hello intel, I've got an EEPROM attached to an i.MX6 via PCIe. I can program the EEPROM over PCIe and then the i210 reports the correct PCI VID:PID of 8086:1533. ethtool reports: # ethtool...
View ArticleRe: i210 FLUPD bit set by write to EEWR? / datasheet description for...
Hi Lo2,Thank you for getting back to us. I will further check for your concern.rgds,wb
View ArticleRe: 82599EN repeats Link Up and Down
Hi Taira, Checking on the fiber module used, FINISAR FTLX8573D3BTL is not a supported fiber module for Intel X520 network adapter. Here is the website for reference:...
View ArticleRe: i210 EEPROM contents: CopperTP vs. FIBRE
Hi Lo, Thank you for the post. I will check for you about the eeprom contents, will update you once there is any finding.rgds,wb
View ArticleRe: Programming iNVM on i210 via JTAG
Hi Steven, Thank you for the post. I will check for you then update once there is any information.rgds,wb
View ArticleRe: X520-DA2 and the HP Direct Attach cables - what is the status?
Hi Filip, Thank you for the post. According to the SFP DA requirement at http://www.intel.com/content/www/us/en/support/network-and-i-o/ethernet-products/000005528.html-Any SFP passive or active...
View Article