Clik here to view.
Re: 82599EN repeats Link Up and Down
Hi! wb No, We use 82599EN on the board which is designed by ourself.This board is connected to mother board via PCI-e.ixgbe driver runs on Linux with ALTERA FPGA(ArriaV SoC). We performed ethtool -t...
View ArticleRe: 82599EN repeats Link Up and Down
Hi Taira, Thank you for the clarification. As this is an ethernet controller used on the board designed by your company, which is a setup involves third party board. Please contact your Intel Field...
View ArticleRe: Intel Corporation 82598EB 10-Gigabit AF Dual Port Network Connection (rev...
Hi asteroid4u, Thank you for the update. I will check for you about the FCOE inquiry.rgds,wb
View ArticleRe: Packet Loss after Windows Updates
Hi Klaus, As this is on-board nic on Supermicro system, have you tried contacting Supermicro for support? Thanks,wb
View ArticleRe: How to make X710-da2 work with Ubuntu 14.04LTS?
Hi Mikhail,Thanks for sharing the solution here. This will be helpful to other users. Sincerely, Sandy
View ArticleIntel i211-AT linux driver
where could download intel i211-at ethernet linux driver ? igb-5.3.5.3.tar.gz does not include support intel i211-at device 02:00.0 Class 0200: Device 8086:1532 (rev 03) Subsystem: Device...
View ArticleRe: x710 disconnects with offloading enabled
Hi Jon, Good day. Have you had the test result using the Dell's firmware? Please feel free to update me.Thanks,wb
View ArticleRe: Intel Corporation 82598EB 10-Gigabit AF Dual Port Network Connection (rev...
Hi asteroid4u, Our X520 series network adapter used 82599 ethernet controller, but based on your output it shows 82598EB ethernet controller, that is why I would like to know the exact serial...
View ArticleRe: Ethernect connection problems
Hi NBreaux, Thank you for contacting Intel. Try to re-install the driver of your network connection. You may check for the available driver for your motherboard or system model. If you wish to try...
View ArticleRe: i210 EEPROM contents: CopperTP vs. FIBRE
Hi wb, here's the link to intels errata document for the i210:Intel® Ethernet Controller I210: Specification Updatepackage markings -> see chapter 1.2 Marking Diagrams. Regards,Lo
View ArticleClik here to view.
Re: Packet Loss after Windows Updates
In fact, I haven't , as i am pretty sure it is not hardware related. It looks like something is telling the system "use both nics to contact target even if one has no corresponding network...
View ArticleRe: i210 EEPROM contents: CopperTP vs. FIBRE
Hi Lo,Thank you for sharing the information. rgds,wb
View ArticleRe: Packet Loss after Windows Updates
Hi Klaus, Thank you for the information. This is onboard NIC on Supermicro system, it is recommended to obtain with system vendor the customized driver that suits the onboard NIC for your...
View ArticleRe: 82579v latency windows 10
Hi neXus2015, Just wondering if you have tried driver version 21.0 and please feel free to update us the result. Thanks you.rgds,wb
View ArticleRe: linux e1000e compile error 2.6.27.7 no member named 'dev'
HI L, Have you contacted HP* for further support? Please feel free to update us.thanks,wb
View ArticleClik here to view.
Where do I get the tool for initializing an empty NVM (Flash) for the 82574?
I've got a new design that has two 82574L controllers. The first is integrated into a Q7 1.2 module running an Atom processor. The second is a connected to via the PCIe to the Q7 module. I have an...
View ArticleRe: X520-DA2 and the HP Direct Attach cables - what is the status?
Dear Intel! This entire situation just make me sick and tired.. Why on earth does one develop standards just to put up "branding walls" around them..? I find this entire situation with "only being...
View ArticleRe: poor network performance when using X520-DA2
It´s still not solved yet. After a few more tests we figured out, that the upstream speed seems to be o.k., just the downstream is so low. We also figured out, that the quality of the connection...
View ArticleRe: How many MAC_VLAN filters can be added to a XL710 port
Thanks for your quick response, Sandy.The issue appears when adding the 256th VLANs on an XL710 port.It is not related with VLAN ID but only with the number of VLANs.There's no problem configuring less...
View ArticleRe: How many MAC_VLAN filters can be added to a XL710 port
Hi Jingxun,The XL710 Adapter can support up to 512 VLAN tags. Please refer to datasheet: http://www.intel.com/content/www/us/en/embedded/products/networking/xl710-10-40-controller-datasheet.html(Page...
View Article