Clik here to view.
Re: Intel(R) 82579V Gigabit Network device issues
Hello , I have a similar issue i work with asus h97 pro motherboard . I am trying to load win2k8 server r2 . I am unable to load network driver . Asus h97 pro used Intel il18-v gigabit lan i tried...
View ArticleRe: Integrate network drivers into Windows 7 installation
Hi Martin,looking at the e1c63x64.inf, the e1c63x64.sys is included, please share the model of your Intel(R) network adapter so we can further check on this one. Have you tried to run the installer...
View ArticleCRC errors on our new gigabit Ethernet adapters
We recently replaced some 1GB network adapters with HP 561FLR-T 10Gbit adapters. 1 went into a Windows server and the other 2 went into Redhat 6.6 servers. No issues at all on the Windows side....
View ArticleRe: Network Connections 19.3
Hi Sage99 Just found NC Version 20.0 (20.0.10.0) - still same problem with driver 12.10.29.0 !Downgraded to 18.7 with driver 12.10.28.0 to fix again
View ArticleRe: Modify open source linux driver
Hi Boxerab, Just to give you some update, we do not support modifying Linux driver,you may contact Linux support for further assistance. Here are the list of Intel 10Gb network adapter...
View ArticleRe: Keeping network settings after driver update?
Hi dbrb2,Please try the ff commands instead: dxsetup /qn /liew install.logYou can an view the log file if you see below message in the last part of the text: Windows Installer installed the product...
View ArticleRe: CRC errors on our new gigabit Ethernet adapters
Dear BillTheDBA, Thank you for contacting Intel. I understand you have upgraded your network card from 1 Gbps to 10 GbE speed. Please make sure you are using a CAT 6 or 6A network cable. You may...
View ArticleClik here to view.
Re: CRC errors on our new gigabit Ethernet adapters
Hi Sandy, I verified that our cables are CAT 6A. So unfortunately that's not the issue. We even changed them out with others but no luck. It's only on our Linux servers where we are receiving the CRC...
View ArticleIntel X710 (X710DA2) loop issue?
Hi, We order an Intel X710DA2 from Provantage and SFPs from Amazon.The NIC and accompanied SFPs work fine with full speed (10 Gbps) when connecting with other NIC Ports. The Issue we need to ask here...
View ArticleRe: Intel X710 (X710DA2) loop issue?
Hi x710,Thank you for the post, Just to double check looping the two ports of that X710DA, are you referring to connecting the cable from port 1 to port 2 of the same X710DA? This kind of connection...
View ArticleRe: CRC errors on our new gigabit Ethernet adapters
Hi BillTheDBA, Thanks for writing back. I see that the CRC Error happens only on Linux System. We also suggest to use the Linux driver supplied by HP since you are using an HP network card model....
View ArticleRe: CRC errors on our new gigabit Ethernet adapters
Thanks for the suggestion, Sandy. I feel like that may be the best next thing to try. The reason I didn't use HP drivers initially is because we're on Redhat 6.6 and HP currently has drivers only up...
View ArticleClik here to view.
Re: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
Hello everybody, Just found this thread, and thought I might share my findings. I just reinstalled Win7 x64 on my audio machine, and first tried the v20 Intel LAN Drivers - both with and without PROSet...
View ArticleUsing XL710 with 10Gb link
Hi! I am trying to use one of the dual port XL710 adapters to connect with a 10Gb port. For that, I am trying to use an adapter from Mellanox: MAM1Q00A-QSA Cable Module ETH 10GbE 40Gb/s to 10Gb/s QSFP...
View ArticleRe: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
Hi Florian,F We are still checking on this, thank you for the information. rgds,wb
View ArticleClik here to view.
Re: Using XL710 with 10Gb link
Hi M_V, The Mellanox MAM1Q00A-QSA Cable is not the tested cable. You may refer to the list of supported cable at...
View ArticleClik here to view.
Re: i218-LM code 10 after restart without cable
Hi dh29, Can you help provide more of your system information? what is the exact server or PC model used? thanks,wb
View ArticleRe: Intel X710 (X710DA2) loop issue?
Hi wb_Intel, wb_Intel wrote: Hi x710,Thank you for the post, Just to double check looping the two ports of that X710DA, are you referring to connecting the cable from port 1 to port 2 of the same...
View ArticleIntel X710 (X710DA2) loop issue?
Hi, We order an Intel X710DA2 from Provantage and SFPs from Amazon.The NIC and accompanied SFPs work fine with full speed (10 Gbps) when connecting with other NIC Ports. The Issue we need to ask here...
View Article