Clik here to view.
Re: Using XL710 with 10Gb link
Hi WB: True, this adapter is not listed (yet?). In the end, I would need to connect it to Intel 10GbE card (can't tell you exact model this time). However, the link was not established neither with the...
View ArticleClik here to view.
change intel® Centrino Wireless N 2230 by Intel® Dual Band Wireless-AC 7260
Can i change my intel® Centrino Wireless N 2230 by Intel Centrino Advanced-N 6235 or best Intel® Dual Band Wireless-AC 7260 on an HP ENVY 17 J073ac
View ArticleClik here to view.
I218-V Asus Rampage V code 10
hello, i hope someone can help me. My network dosnt work. After i installed the latest driver i get the Code 10 in the device manager. but why
View ArticleI cannot access it
Hi, This is my first post, so please be kind if the post is not placed in the right location. My home gateway / vivid wireless "4G" account is a few years old, but it seems that the speed is getting...
View ArticleRe: Using XL710 with 10Gb link
Hi M_V, Thanks for the clarification. Let me check on this. rgds,wb
View ArticleRe: PCI passthrough of Ethernet Controller XL710 for 40GbE QSFP+
Hi, Is there a possibility that i could get an update on this any time soon? Atleast as to whether this is a known i40e driver issue or something else?I have updated the i40e driver and the XL710...
View ArticleCan't turn off SRIOV on CentOS 7 after its turned on
I'm running CentOS 7 with a dual NIC nianctic (10G, ixgbe), and I have been experimenting with SRIOV. I turned on SRIOV via the following command" echo 8 >...
View ArticleRe: I218-V Asus Rampage V code 10
Hi besi, Thank you for contacting Intel. In relation to the Code 10 error that you have encountered, did the error appear after restarting your system?If yes, make sure to disable power savings under...
View ArticleRe: XL710 firmware do not work?
Hi ChengyuLi2, Please try upgrade to the latest driver. Further, please refer to this site to download the latest NVMUpdatePackage for XL710, the update guide is also included in the website Intel®...
View ArticleRe: Intel i218-LM link speed LED states?
Hi dh29, Here is the datasheet you can refer to http://www.intel.es/content/dam/www/public/us/en/documents/datasheets/i218-ethernet-connection-datasheet.pdf about the LED. Based on the...
View ArticleClik here to view.
Re: I cannot access it
Hi Goldstar, assuming you're using AU vivid wireless as your Internet provider, the link below might be able to shed some light on your concern....
View ArticleRe: Can't turn off SRIOV on CentOS 7 after its turned on
Hi morganyang1982, Thank you for contacting Intel. On Linux Kernel version 3.8.x and above, VF can be destroyed or disabled by writing the value 0 to the sriov_numvfs parameter via sysfs interface....
View ArticleRe: Intel i218-LM link speed LED states?
Hi wb_Intel, Thanks you for your update. I had previously viewed the datasheet, and I agree that your description of the device staying in ULP when the cable is disconnected is correct. However, the...
View ArticleRe: i218-LM code 10 after restart without cable
Hi wb_intel, I am using a Kontron Type-6 COM-Express module, part number COMe-cHL6 2980U, that uses an Intel Celeron 2980U 1.6 GHz processor. My operating system is Windows 8.1 64-bit Pro (fully...
View ArticleRe: Can't turn off SRIOV on CentOS 7 after its turned on
Hi Sandy: Thanks for your reply, that method is what I'm using to disable SRIOV right now. However, as soon as the system reboots, sriov_numvfs becomes 8 again. Before I enabled SRIOV, it was always 0,...
View ArticleRe: Can't turn off SRIOV on CentOS 7 after its turned on
Hi Morgan, Thanks for replying. I noticed you've entered the command "echo 8" instead of "echo 0", that's why you are seeing the sriov_numvfs value of 8. Make sure to change it to echo 0. Hope this...
View ArticleRe: Unable to establish link with Intel 82599ES 10-Gigabit SFI/SFP+ Network...
Hi jmarshall80,Please help share the ff info:1) output of ethtool -t2. The setup script for further investigation on why the link fails after installing PF_ring3) Use 10Gbps connection instead of...
View ArticleRe: Intel Ethernet Connection I217-LM (WinPE drivers)
Thanks Terry_Private. Same issue here with new DELL machines equipped with I217-LM. I need to ghost them and the WinPE does not network connect. It would be nice to get the drivers.
View ArticleRe: Using XL710 with 10Gb link
Hi WB: since it's probably not easy to get your hands on the adapter, let me ask a simpler question: * does XL710 support 10Gb data rates? It seems that it does support it according to the "Data Brief"...
View ArticleClik here to view.
Re: PCI passthrough of Ethernet Controller XL710 for 40GbE QSFP+
Hi Jacob, We are still checking on this, apologize for any inconvenience this might have caused. will update you as soon as there is any finding. thanks,wb
View Article