"Unplugged" message immediately followed by "Now Connected"
Hi, I have a 7.5 year Gigabyte GA-P35-DS3R motherboard running Windows XP service page 3. It has an integrated "Realtek RTL8168/8111 PCIe Gigabit Ethernet NIC" connected to Verizon FiOS. Once or twice...
View ArticleRe: iSCSI with Intel PRO/1000 PT Dual Port Server Adapter
Hi, Use Jumbo Packet to 9k See you later, bye
View ArticleRe: Lan connection lost on I218-V when streaming
thx i will try it.I have the same problem with my asus X99-A mobo and intel lan
View ArticleRe: I217-LM huge packetloss with WaitAutoNegComplete=On and...
Hi Reni, Thank you for the update rgds,wb
View ArticleRe: Lan connection lost on I218-V when streaming
Hi yarled, Thank you for posting. Hope this helps resolve your network connection problem. Sincerely, Sandy
View ArticleRe: adding a PF to a linux bridge
Hi Haifeng, Sorry for the delay. Please try this driver version 1.2.48, it should address the communication issue. Please find link to download the driver below:Intel Ethernet Drivers and Utilities -...
View ArticleClik here to view.
Re: iSCSI with Intel PRO/1000 PT Dual Port Server Adapter
deko, Your post has been moved over the networking communities.
View ArticleRe: iSCSI with Intel PRO/1000 PT Dual Port Server Adapter
Hi Deko, Thank you for the post. It depends on the system and setup, what you can try is to tweak the following options:adjust the Interrupt Moderation, TCP/IP offloading options, Performance...
View ArticleRe: "Unplugged" message immediately followed by "Now Connected"
Hi Bill, Thank you for contacting Intel. Can you please provide more information regarding your physical connection? From the adapter, to which port on Verizon modem/router was it connected? We look...
View ArticleClik here to view.
Re: "Unplugged" message immediately followed by "Now Connected"
Hi Sandy, Thanks for responding. I have an ethernet cable running from the Intel ethernet adapter to port #1 on the FiOS router. This the the FiOS Router: firmware version : 40.21.10.3...
View ArticleRe: "Unplugged" message immediately followed by "Now Connected"
Hi Bill, Thanks for providing the details. Make sure that your computer (with the EXPI9301CT adapter) is connected to the LAN port. The LAN port should have 4 ports. You can try to move the connection...
View ArticleRe: Intel(R) 82579V Gigabit Network device issues
It works great!... i just installed windows server 2008r2x64 on a Asus Sabertooth P67 motherboard and solved this issue with your help srw1973, Thanks a lot. I did it with the drivers downloaded from...
View ArticleRe: I218-LM ping times go through the roof after a couple of seconds on...
I can confirm that for us the issue is gone after updating the LAN drivers from here. Intel PRO/1000 LAN Adapter Software (Gigabit Ethernet Driver) for Windows 8.1 (64-bit), 7 (32-bit and 64-bit) -...
View ArticleClik here to view.
Issue Option Rom Boot Iscsi on Gigabit ET dual port Server
Hi all, i not found answer for my problem. Option ROM iSCSI do not promt "Ctrl+D" Before Motreboard UEFI BIOS. I can't enter in it. My Motreboard is :I plug my nic en PCI-E x8 in Black port So, my nic...
View Articlecable réseau débranché i217-v
Bonsoir à tous, Je recontre un problème avec ma connection ethernet INTEL I217-V depuis quelques jours, les leds autour du port ethernet ne s'allume plus et windows 7 m'affiche le message "câble réseau...
View ArticleRe: cable réseau débranché i217-v
Les outils de diags https://downloadcenter.intel.com/download/4237/Administrative-Tools-for-Intel-Network-Adapters sont necessaires.Je me doute que c'est une LOM ( Carte réseau sur la carte mère) non ?
View ArticleRe: I218-LM ping times go through the roof after a couple of seconds on...
Hi AWSPM, Thank you for sharing the information, glad the issue is fixed rgds,wb
View ArticleRe: intel nic drivers 19.3 huge 6000+ dpc latency spike once a few secs
Hi Hlidskjalf, Thank you for sharing the information there is no mention about the fix for latency issue so far in version 20.1 and Windows 10 is not officially released yet. rgds,wb
View ArticleRe: Issue Option Rom Boot Iscsi on Gigabit ET dual port Server
Hi mips81 Thank you for the post. There is no Windows 10 driver for ET Dual port server adapter. For the ISCSI boot, please make sure the ISCSI boot is enabled on the network adapter, use...
View ArticleClik here to view.
Re: Differences: I350-T4 vs I350-T4V2
Hi gdi2k, Welcome to Intel Communities. The Intel® Ethernet Server Adapter I350-T4 was discontinued and is being replaced with the new version (I350-T4V2) which have the AUX Power component changes...
View Article